Previous Thread
what address are you typing in to ssh your pogoplug?
if you are using my.pogoplug.com that is not the address for your pogoplug, you have to use the ip address of your pogoplug on your local network. eg, 192.168.1.20. or if you want ssh access outside of your internal network you need to open the correct port on your router, 22 and you can ssh your pogoplug with your ip address. or a free domain name from http://dyndns.info
Recently I got two Pogo-B01 from Buy.com with firmware 2.5.9.5, it look like Pogo Pink but inside is not Pogo-Pink V2
Anyway I have enabled the SSH but every time I try to login SSH I got "Access denied" message
Thanks
June 4, 2011 10:54 AM
June 4, 2011 11:04 AM
Hi mdc4115,
Thanks for your information.
From my router so I knew the pogoplug's ip is 192.168.15.109
then I use Putty to connect it but always Access denied after I key the password.
I have disable and enable the SSH many times but no help
Is anything to do with the firmware, I bought two because I thought they are Pink V2 but I was wrong, maybe I better just send it back to Buy.com to get my money.
Add Your Reply
Copyright © 2012
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My Open Router |
Pogoplugged |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
Pogoplug™ is a trademark of CloudEngines, Inc. PogoPlugged.com is not affiliated with CloudEngines, Inc.
