October 8, 2010 8:46 PM

I have a HP Photosmart D7160 which doesn't seem to work with PogoPlug. I haven't tried swapping out USB cables yet (although I doubt that's the problem). I'll troubleshoot some more but I don't think there's much else I can do.

October 10, 2010 4:54 PM

Natch said: I have a HP Photosmart D7160 which doesn't seem to work with PogoPlug. I haven't tried swapping out USB cables yet (although I doubt that's the problem). I'll troubleshoot some more but I don't think there's much else I can do.

Okay...odd, the power went out and when it came back on both pogoplug and the printer started up and pogoplug now recognizes it.  I'm not sure what happened there but everything seems fine now.

October 14, 2010 8:38 AM

My Epson Stylus Photo PX710W seems to work well. It is attached wirelessly to my home network.

Carl

October 18, 2010 8:56 PM

I have a Brother HL-3070CW that shows up on my pogoplug account page as connected. The documents are listed in the tab as "waiting to print"...believe my printer is not compatible as the documents are simply in limbo...

October 20, 2010 5:55 AM

I would like to buy a Pogoplug, but first I need to know if my Hp Deskject 5550 is supported! Is it supported? I really need the print share feature!

Thanks!

October 20, 2010 9:18 PM

I can attest to the fact that my networked HP L7680 Inkjet Printer is being detected by my pogoplug and it is working fine by sending attachments to print@mypogoplug.com. Note the printer is connected via an Ethernet cable to my local network; I do not use a direct connection to the pogoplug via a USB cable.

October 24, 2010 7:38 AM

Hi,

I have find on pogoplug website the list of:

Pogoplug Compatibility List: Printers

see below,

http://support.pogoplug.com/forums/237416-printing-from-your-pogoplug

Do you if it is plan to include other printers from another customer like per example: Samsung ?


Thanks

November 1, 2010 3:02 PM

Why does it take so long to get other manufacturers printer support?

November 8, 2010 12:51 PM

Hi there, I have an Epson Stylus CX3200. The pogoplug recognized the printer as Epson, but when i mailed a file to the pogoplug it doesn't print a thing. The file is visible, but nothing more.
Regards, Melvin

November 11, 2010 8:47 AM

If I connect my printer to the pogoplug usb, how can I share it so that I can use file->print in my applications? Currently I can only send the file to the printer by sending an e-mail...Not really a print server as such then...

November 11, 2010 10:50 AM

I have to say I'm overall dissapointed with Cloudengines regarding remote printing (among other things I'll mention in another post). You roll out this great feature, but then only support 2 of the major printer manufacturers. I understand that HP and Epson are easier for you guys to make this work, but releasing this feature and touting it to all is a poor way to run your business. That's like saying we have this amazing new car we'd like to sell you, it gets a 100 miles to the gallon and only costs 10$, but it only runs on a special fuel that only 10 people in the entire U.S. have access to. Don't you think that logic is kind of stupid? If you have a feature that can't support enough of the major brands, then DON"T RELEASE IT! Plain and simple. You should at least support the following brands: HP, Cannon, Lexmark, Epson and Brother. If you go to any major retailer (online or brick and mortar) you will find them advertising these brands. I can understand a delay in support for brands that are a little more obscure. But only HP and Epson. That's rediculous.

end of rant.

Thanks.

November 17, 2010 12:49 PM

I have the HP Officejet J4580, which is in the official list of supported printers, but my pogoplug does not show me the printer!!!!!! I am frustrated, really!

I enabled printer discovery, but nothing!
At the moment i am really upset, streaming of mkv files to my samsung TV mediaplayer is not working and so is my printer!
Why do I have bought this device, I was so excited......

I'm an island! I'm Ibiza!